The Air Remote TTL-N is designed to wirelessly and painlessly integrate your Profoto B1 and B2 lights with your Nikon camera and operate lights from up to 300m away. Simply attach the module to the hotshoe and set for either automatic TTL mode or Manual mode and you'll be good to go. TTL mode is ideal when you just need a simple point-and-shoot set-up, while the Manual mode offers you complete control of your lighting.
| Manchester |
London Profoto Air Remote TTL-N Stockists, Manchester Profoto Air Remote TTL-N Retailers, Bristol Profoto Air Remote TTL-N Dealers, Cardiff Profoto Air Remote TTL-N Suppliers, Leeds Profoto Air Remote TTL-N Stockists, Glasgow Profoto Air Remote TTL-N Dealers, Sunderland Profoto Air Remote TTL-N Suppliers, Newcastle Profoto Air Remote TTL-N Retailers, Bradford Profoto Air Remote TTL-N Stockists, Coventry Profoto Air Remote TTL-N Suppliers
Supplier Deal: £320.00
An adapter to convert a 3.5mm mini jack to a 6.25mm phono jack for use with Bowens, Profoto etc.
Designed exclusively to operate with the Interfit ProFlash, this tranceiver set enables remote operation up to 50m away, with a selection of 16 channels. The Transmitter and Receiver feature simplified controls, letting you adjust the flash power, MF-Assist Beam, Audio Signal and flash triggering all from the camera position.
Designed to work exclusively with the Bowens Gemini Classic, R and PRO flash heads the Pulsar Tx and Trigger Card Kit enables you to operate the flash without the need for trailing sync cables The Pulsar Tx fits onto a standard camera hotshoe (Sony/Minolta will require an adapter) and locks into place with a unique 'click-lock' removing the risk of lost connections when the camera is switched from landscape to portrait. Powered by a single CR2032 battery the Pulsar Tx has a maximum range of 25m and operation is straight-forward via two push buttons, allowing full control over the 24 radio channel combinations and the test flash function. The card simply inserts into the slot on the back of the Gemini head. The new design is a significant size and weight reduction when compared with the standard Pulsar Radio Trigger.
This handy USB-connected transceiver unit provides you with the capacity to control all of your Elinchrom units with built-in Skyport RX or connected Transceiver RX via a PC or Mac. The EL-Skyport software automatically searches for nearby compatible units and allows control of Elincrom RX and ELC functionality, including flash delay and standby mode. The software also features the ability to save pre-sets, Photo-Job Studio Management tools and a programmable timer. Firmware updates are intermittently available and can be downloaded from Elincrom's website.
The EL-Skyport Transceiver RX Adapter is required when the Ranger RX / Speed / Speed AS are used with the EL-Skyport Transceiver RX for remote and trigger options.