The Rosco LitePad 8inch Snake Arm is a flexible arm designed to allow exact positioning of the smaller sized LitePads (maximum load 865g).
The Westcott Grip Head is a versatile studio accessory that can be used to attach a wide variety of accessories such as umbrellas, boom arms, gobos and Scrim Jim frames to a lighting stand.
The Elinchrom RQ Boom Arm is designed primarily for use with the Ranger Quadra heads (other small lightweight heads can also be used). The arm extends from 63cm up to a maximum of 156cm and the rubberised grip means the light can be easily and safely positioned as required particularly when used above the subject. The two sections of the EL-Boom Arm can be quickly adjusted with the clip-locks.
For kit too valuable to let slip, Matthews grip heads can't be beat. Enormously strong and utilised by many Hollywood film studios, these 64mm (2.5 inch) solid metal grip heads possess both 9.5mm (3/8) and 16mm (5/8) holes.
The Limelite Mosaic 2x1 Panel Mounting Kit allows two Mosaic LED panels to be mounted side by side onto a single medium/heavy-duty lighting stand. It includes a wide mounting stirrup with full swivel and tilt for stand/HiGlide mounting and is cabled to allow both Mosaic panels to be simultaneously controlled from either panel via their on-board DMX in/out sockets.
The 50cm fixed length Drop Ceiling Support allows the Hi-Glide rails to be fixed at the correct height for effective operation. (3.5m from the floor is the recommended optimum height)
A premier lighting stand for professional studio use, the Beefy Baby uses steel legs and a steel top riser with the baby pin welded in place rather than pinned, in order to increase strength and longevity. The independently extending Rocky Mountain Leg' enables the levelling of the stand on awkward terrain.
An invaluable multi-role clamp for both professional and amateur riggers and lighting techs. The Matthellini secures to almost anything - from tubes to tables - and this wide-spanning 15cm (6 inch) long model features a fixed end jaw portion and a 16mm spigot, for attachment of lighting heads and accessories.
The Interfit Strobies Porta Prop Set is the ideal background support system for paper or vinyl rolls. The problem with regular background support systems is that the spread of the stands takes up a lot of floor space, and is often not as stable as you might like; particularly with heavy background rolls. By contrast, the two-section Interfit Strobies Porta Prop Set is simply extended to wedge between the floor and ceiling and is then jacked securely into place. Rubber feet on each end ensure no damage is done to either surface and take up very little floor space. The supplied triple hooks are easily clamped into place on the auto-polls and paper or vinyl rolls hung from them using the Expan paper clamps that fit the cardboard inner tube of most background rolls (2 pairs are supplied, enough for 2 rolls). The paper or vinyl can then be easily unrolled or rolled as required using the pulley chains. Maximum convenience, minimum fuss; job's a good'un!
Designed to be fixed to a solid wall, this Interfit INT309 bracket can be used to support both studio lighting and accessories such as reflectors. The arm may be extended from 74cm to 124cm and bear a maximum load of 5kg at full extension. The arm should only be mounted to a solid wall.